تشكيل Iroha

يتم تعيين تشكيل الأقران المحلي TOML الملفات. هذا يختلف عن التكوين على السلسلة تغيرت من خلال SetParameter التعليمات. يجب أن يتم تمثيل سلوك الإنتاج في ملف تشكيل أو معايير داخل السلسلة. المتغيرات البيئية ليست بوابات الميزة.

استخدم --config CLI الحجة لتحديد المسار إلى ملف التكوين.

النموذج

للحصول على وصف مفصل لكل معايير، يرجى الرجوع إلى معايير المرجعية.

peer.template.toml

## For the full reference, see the configuration docs under specs/references

## You can use another TOML file to extend from.
## For a single file extension:

# extends = "./base.toml"

## Or, for a chain of extensions:

# extends = ["base-1.toml", "base-2.toml"]

# chain =
# public_key =
# private_key =
# default_account_domain_label = "default.universal"  # Used only for AccountAddress selector encoding/compression; AccountId parsing stays domainless.
# chain_discriminant = 0x02F1              # I105 prefix / chain discriminant; override for dev/test networks.

telemetry_enabled = true
telemetry_profile = "operator"  # {disabled, operator, extended, developer, full}

# trusted_peers = [
#   # Validators must use BLS-Normal keys; non-BLS peers are ignored for consensus.
#   # Supply a matching PoP entry below for every validator.
#   # "bls0120...@127.0.0.1:1337",
# ]

## BLS PoP entries corresponding to `trusted_peers`. Required for every validator.
## Hex strings may be prefixed with 0x or raw hex.
# [[trusted_peers_pop]]
# public_key = "bls0120..."
# pop_hex = "0x..."

[genesis]
# The manifest referenced here carries parameter families such as transaction.max_signatures,
# transaction.max_instructions, transaction.ivm_bytecode_size, transaction.max_tx_bytes,
# and transaction.max_decompressed_bytes. Adjust those values inside
# the genesis file when tightening admission limits.
# public_key =
# file =

[network]
# address =
# public_address =
# block_gossip_period_ms = 10_000  # clamped to >= 100ms
# block_gossip_max_period_ms = 30_000 # clamped to >= block_gossip_period_ms
# block_gossip_size = 4  # fanout cap for block-sync gossip (peer samples, block sync updates, availability votes, NEW_VIEW)
# peer_gossip_period_ms = 1_000   # clamped to >= 100ms
# peer_gossip_max_period_ms = 30_000 # clamped to >= peer_gossip_period_ms
# transaction_gossip_period_ms = 1_000  # clamped to >= 100ms
# transaction_gossip_resend_ticks = 3   # resend after N gossip periods
# transaction_gossip_size = 500 # Maximum transactions sent or accepted in one gossip batch (canonical ceiling: 512).
# transaction_gossip_public_target_cap = 16        # public-lane fanout cap (null = broadcast)
# transaction_gossip_restricted_target_cap = null  # restricted-lane fanout cap (null = full commit topology)
# transaction_gossip_public_target_reshuffle_ms = 1_000     # public target reshuffle cadence (clamped to >= 100ms)
# transaction_gossip_restricted_target_reshuffle_ms = 1_000 # restricted target reshuffle cadence (clamped to >= 100ms)
# idle_timeout_ms = 300_000  # clamped to >= 100ms
# reply_writer_flush_timeout_ms = 30_000 # exact-reply base writer deadline; clamped to >= 100ms
# connect_startup_delay_ms = 0 # delay outbound dials after startup (0 disables)
# trust_decay_half_life_ms = 300_000 # halve negative trust scores every 5 minutes
# trust_penalty_bad_gossip = 5       # penalty applied per invalid trust gossip
# trust_penalty_unknown_peer = 3     # permissioned-only penalty when trust gossip mentions peers outside topology; logged + counted as p2p_trust_penalties_total{reason="unknown_peer"}
# trust_min_score = -20              # drop trust gossip at or below this score
# trust_gossip = true                # Advertise/accept trust gossip; set false to opt out in permissioned overlays
#
# # SCION capability gossip and dialing:
# # SCION preference is automatic when both peers advertise support.
# # Legacy/non-SCION peers keep using normal transport fallback automatically.
# # The following legacy keys are ignored at runtime and kept only for compatibility:
# # scion_enabled = false
# # scion_fallback_to_legacy = true
# # scion_listen_endpoint = "scion://0.0.0.0:30257" # reserved for future inbound support
# # scion_routes = { "ed0120...peerkey..." = "scion-gateway.example.com:30257" }
#
# # Bounded queue capacities:
# p2p_queue_cap_high = 8192     # consensus/control
# p2p_queue_cap_low  = 32768    # gossip/sync
# p2p_post_queue_cap = 2048     # per-peer post channel per topic
# p2p_subscriber_queue_cap = 8192  # inbound subscriber queue feeding the node relay
#
# # Consensus ingress limiting (per peer):
# consensus_ingress_rate_per_sec = 300
# consensus_ingress_burst = 300
# consensus_ingress_bytes_per_sec = 67_108_864
# consensus_ingress_bytes_burst = 134_217_728
# Critical recovery/coordination + payload delivery (BlockCreated, Proposal, QcVote/Qc,
# VrfCommit/VrfReveal, FetchPendingBlock, RbcInit/RbcReady/RbcDeliver, Evidence) use the
# critical caps; bulk payload frames (BlockSyncUpdate/ExecWitness/RbcChunk/BlockSync) use a
# separate bucket seeded from the standard caps, scaled by block_time vs 2s (1s -> 2x),
# and skip penalty cooldowns.
# consensus_ingress_critical_rate_per_sec = 300
# consensus_ingress_critical_burst = 300
# consensus_ingress_critical_bytes_per_sec = 134_217_728
# consensus_ingress_critical_bytes_burst = 268_435_456
# consensus_ingress_penalty_threshold = 32
# consensus_ingress_penalty_window_ms = 5000
# consensus_ingress_penalty_cooldown_ms = 10000
#
# # Overflow policy: when a per-peer post channel overflows, disconnect or drop?
# # Default: true (disconnect). Set to false to keep the connection and drop messages.
# disconnect_on_post_overflow = true

## Consensus settings (Sumeragi)
## Participation role and collector settings for consensus.
## - role: "validator" (proposes, votes, commits) or "observer" (sync-only, no votes)
## - consensus_mode: "permissioned" (default) or "npos"
## - collectors.k: number of concurrent collectors per height (K). 1 preserves the original single proxy-tail collector.
## - collectors.redundant_send_r: redundant send fanout; upon local timeout in view 0, validators may send their vote to up to r collectors.
## - collectors.parallel_topology_fanout: additional topology fanout alongside collectors (0 disables).
##   Tooling seeds on-chain defaults as 2f+1 based on validator count; config fallback remains 1 if parameters are absent.
##
## Note: K and r are also stored on-chain in `SumeragiParameters`/`sumeragi_npos_parameters`. At startup, nodes adopt the
## on-chain values (and log a mismatch if config differs). Ensure operator configs and on-chain
## parameters are aligned to avoid inconsistent pacing. Invalid values (`k == 0` or `r == 0`)
## are rejected at startup; collector selection is floored to commit quorum (bounded by non-leader
## peers), and votes only fall back to the full commit topology when collectors are disabled or
## local-only.
[sumeragi]
# role = "validator"
# consensus_mode = "permissioned"

[sumeragi.collectors]
# k = 1
# redundant_send_r = 3 # example for 4 validators (2f+1)
# parallel_topology_fanout = 1

[sumeragi.advanced.queues]
# votes = 8192          # vote channel capacity
# block_payload = 128   # block payload capacity (proposal backpressure if saturated)
# rbc_chunks = 1024     # RBC chunk capacity (proposal backpressure if saturated)
# blocks = 256          # block message capacity (block sync updates, params, etc.)
# control = 1024        # control/background/lane channel capacity

[sumeragi.advanced.worker]
# iteration_budget_cap_ms = 2000       # cap worker loop time budget per iteration
# iteration_drain_budget_cap_ms = 2000 # cap mailbox drain per iteration
# tick_work_budget_cap_ms = 500        # cap per-tick proposal/commit work (0 disables)
# parallel_ingress = true              # run per-queue ingress threads with a ticketed gate
# validation_worker_threads = 0        # pre-vote validation worker threads (0 = auto)
# validation_work_queue_cap = 0        # validation work queue per worker (0 = auto)
# validation_result_queue_cap = 0      # validation result queue (0 = auto)
# qc_verify_worker_threads = 0         # QC verify worker threads (0 = auto)
# qc_verify_work_queue_cap = 0         # QC verify work queue per worker (0 = auto)
# qc_verify_result_queue_cap = 0       # QC verify result queue (0 = auto)
# validation_pending_cap = 8192        # deferred vote-validation backlog cap

[sumeragi.advanced.pacemaker]
# pending_stall_grace_ms = 250       # grace before pending progress counts as stalled
# active_pending_soft_limit = 1      # allow proposals with <= N blocking pending blocks (0 = strict)
# rbc_backlog_session_soft_limit = 8 # allow proposals with <= N backlog sessions (0 = strict)
# rbc_backlog_chunk_soft_limit = 256  # allow proposals with <= N missing chunks (0 = strict)
# backoff_multiplier = 1             # view-timeout backoff multiplier
# rtt_floor_multiplier = 2           # RTT floor multiplier for pacemaker backoff
# max_backoff_ms = 10000             # max pacemaker backoff window
# jitter_frac_per_mille = 0          # jitter band size as permille of backoff window (0 disables)

[sumeragi.advanced.pacing_governor]
# window_blocks = 20
# view_change_pressure_permille = 200   # view-change increments per block (permille)
# view_change_clear_permille = 50
# commit_spacing_pressure_permille = 1300 # avg commit spacing vs target (permille)
# commit_spacing_clear_permille = 1100
# step_up_bps = 1000
# step_down_bps = 100
# min_factor_bps = 10000
# max_factor_bps = 20000

[sumeragi.persistence]
# commit_inflight_timeout_ms = 30000
# commit_work_queue_cap = 1            # commit worker queue capacity
# commit_result_queue_cap = 1          # commit worker result queue capacity

[sumeragi.recovery]
# missing_block_signer_fallback_attempts = 1 # fetch from commit certificate signers before falling back to full topology

[sumeragi.gating]
# membership_mismatch_alert_threshold = 1    # consecutive mismatches before alert/fail-closed
# membership_mismatch_fail_closed = false    # drop consensus messages from mismatched peers
# consensus_future_height_window = 8         # drop consensus messages beyond this height delta (0 disables)
# consensus_future_view_window = 8           # drop consensus messages beyond this view delta (0 disables)
# invalid_sig_penalty_threshold = 3          # invalid signatures before temporary suppression (0 disables)
# invalid_sig_penalty_window_ms = 5000
# invalid_sig_penalty_cooldown_ms = 15000

[sumeragi.da]
# enabled = true                       # commit waits for availability evidence when enabled
# max_commitments_per_block = 16       # max DA commitments per block
# max_proof_openings_per_block = 128   # max DA proof openings per block

[sumeragi.advanced.da]
# quorum_timeout_multiplier = 3          # DA quorum timeout scaling (block_time + 3 * commit_time)
# availability_timeout_multiplier = 2    # availability timeout scaling for DA logging/rebroadcasts
# availability_timeout_floor_ms = 2000   # floor for availability timeouts (0 disables floor)

[sumeragi.npos]
# epoch_length_blocks = 3600           # validator set epoch length
# use_stake_snapshot_roster = true     # hydrate roster from stake snapshots
# advanced.npos.timeouts.*_ms derive from the effective block time when omitted
# vrf.* windows/deadlines derive from epoch_length_blocks when omitted

#[sumeragi.advanced.npos.timeouts]
# propose_ms = 350
# prevote_ms = 450
# precommit_ms = 550
# exec_ms = 150
# witness_ms = 150
# commit_ms = 850
# da_ms = 750
# aggregator_ms = 120

#[sumeragi.npos.vrf]
# commit_window_blocks = 100
# reveal_window_blocks = 40
# commit_deadline_offset_blocks = 100
# reveal_deadline_offset_blocks = 140

[sumeragi.advanced.rbc]
# chunk_fanout = null               # RBC chunk fanout cap (null = full roster minus local)
# chunk_max_bytes = 262144          # RBC chunk size cap (bytes)
# payload_chunks_per_tick = 64      # max RBC chunks broadcast per tick
# pending_session_limit = 256       # max pending RBC sessions before INIT

[torii]
# address =
# max_content_len = 64_000_000
# receipt_public_key = "secp256k1..."  # optional; defaults to an ephemeral Secp256k1 signer when unset
# receipt_private_key = "802620..." # optional; must be set alongside receipt_public_key
# query_idle_time_ms = 10_000
# query_store_capacity = 128
# query_store_capacity_per_user = 128
# ws_message_timeout_ms = 10_000
# api_high_load_tx_threshold = 16384           # queued txs that activate high-load API policy
# api_high_load_stream_threshold = 16384       # reject new SSE/WS stream admissions at this load
# api_high_load_subscription_threshold = 16384 # override the subscription-WS admission threshold

[torii.peer_geo]
# enabled = false
# endpoint = "https://geo.example/api" # Required HTTPS ip-api compatible endpoint when peer geo lookups are enabled.

[torii.operator_auth]
# enabled = false
# require_mtls = false
# token_fallback = "bootstrap"
# token_source = "operator"
# tokens = []
# rate_per_minute = 30
# burst = 10
# lockout_failures = 5
# lockout_window_secs = 300
# lockout_duration_secs = 900

[torii.operator_auth.webauthn]
# enabled = true
# rp_id = "example.com"
# rp_name = "Iroha Operator"
# origins = ["https://example.com"]
# user_id = "operator"
# user_name = "operator"
# user_display_name = "Iroha Operator"
# challenge_ttl_secs = 120
# session_ttl_secs = 900
# require_user_verification = true
# allowed_algorithms = ["es256", "ed25519"]

## Network Time Service (NTS)
## Provides a robust network time estimate for timers and diagnostics.
## Does not affect consensus acceptance rules; block header timestamps remain the source of truth.
[nts]
# sample_interval_ms = 5_000          # Period between peer time probes (clamped to >= 100ms)
# sample_cap_per_round = 8             # Max peers probed per round
# max_rtt_ms = 500                     # Discard samples with RTT above this
# trim_percent = 10                    # Trimmed median percent (each side)
# per_peer_buffer = 16                 # Per-peer ring buffer depth for samples
# smoothing_enabled = false            # Enable EMA smoothing (advisory)
# smoothing_alpha = 0.2                # EMA alpha in [0,1]; higher = more responsive
# max_adjust_ms_per_min = 50           # Slew cap: max ms adjustment per minute
# min_samples = 3                      # Minimum samples required for healthy status
# max_offset_ms = 1_000                # Max absolute offset (ms) before unhealthy (0 disables)
# max_confidence_ms = 500              # Max MAD confidence (ms) before unhealthy (0 disables)
# enforcement_mode = "warn"            # Admission behavior: "warn" or "reject"

[kura]
# init_mode = "strict"
# store_dir = "./storage"
# blocks_in_memory = 1024
# block_sync_roster_retention = 7200  # Certified commit-roster snapshots retained for block-sync recovery
# roster_sidecar_retention = 512      # Roster sidecars retained in pipeline/roster_sidecars.* before GC

[logger]
# level = "INFO"
# format = "full"

[ivm]
# memory_budget_profile = "cpu-small" # Compute resource profile used to cap IVM guest stack budgets.

[ivm.banner]
# show = true   # Print the Norito/IVM startup banner on daemon launch.
# beep = true   # Play the retro startup tune (requires the optional `beep` feature).

## Transactions Queue
[queue]
# capacity = 262144
# capacity_per_user = 16384
# transaction_time_to_live_ms = 86_400_000 # 1 day

[zk.halo2]
# enabled = false
# max_k = 16
# verifier_budget_ms = 20
# verifier_max_batch = 16
# verifier_worker_threads = 0        # 0 = auto by available parallelism
# verifier_queue_cap = 0             # 0 = auto-derived from worker count
# verifier_enqueue_wait_ms = 25      # bounded enqueue wait before timeout under saturation
# verifier_retry_ring_cap = 2048     # in-memory retry ring capacity for important tasks
# verifier_retry_max_attempts = 3    # retry rounds before final drop
# verifier_retry_tick_ms = 5         # retry scheduler tick interval

[governance]
# Allowed JDG attestation signature schemes.
# jdg_signature_schemes = ["simple_threshold"] # or "bls_normal_aggregate"

# Runtime upgrade provenance policy.
# [governance.runtime_upgrade_provenance]
# mode = "optional" # or "required"
# require_sbom = false
# require_slsa = false
# signature_threshold = 0
# trusted_signers = ["ed0120..."]

[snapshot]
# mode = "read_write"
# create_every_ms = 60_000
# store_dir = "./storage/snapshot"

[telemetry]
# Master switch: enable telemetry outputs via `telemetry_enabled` and choose capability bundles via `telemetry_profile`.
# name =
# url =
# min_retry_period_ms = 1_000
# max_retry_delay_exponent = 4

[dev_telemetry]
## A path to a file with JSON logs
# out_file = "./dev_telemetry.json"

[streaming]
# Optionally override the Ed25519 identity used for streaming control-plane signatures.
# identity_public_key = "ed0120..."
# identity_private_key = "802620..."
#
# Kyber HPKE support (both must be provided together, hex without 0x prefix).
# kyber_public_key  = ""
# kyber_secret_key  = ""
#
# Directory for encrypted streaming session snapshots.
# session_store_dir = "./storage/streaming"
#
# Capability mask advertised during QUIC negotiation (bit-or of supported features).
# feature_bits = 0b11

[crypto]
# Toggle Chinese SM2/SM3/SM4 support (verification only unless admission is configured for SM signatures).
# Default hash algorithm fall-back when callers omit one (switch to `sm3-256` alongside SM rollouts).
# default_hash = "blake2b-256"
# Signing algorithms permitted during transaction admission (must include `ed25519`; append `sm2` once enabled).
# allowed_signing = ["ed25519"]
# Default SM2 distinguishing identifier when clients omit `distid`. The node seeds
# `Sm2PublicKey::default_distid()` with this value during startup, so adjustments take
# effect before any transactions execute; update it to match your PKI profile.
# sm2_distid_default = "1234567812345678"

## Hardware acceleration (optional; defaults enable all available backends)
## These settings do not change outputs; they only affect performance by allowing
## IVM to use Metal (macOS) and/or CUDA (when compiled) after passing golden self-tests.
[accel]
# enable_simd = true   # Allow SIMD/NEON/AVX; set false to force scalar execution for deterministic parity runs
# enable_cuda = true   # Use CUDA backend when compiled and available
# enable_metal = true  # Use Metal backend on macOS when available
# max_gpus = 0         # Maximum GPUs to initialize (0 = auto/no cap)
# merkle_min_leaves_gpu = 8192  # Minimum leaves to offload Merkle leaf hashing to GPU
# merkle_min_leaves_metal = 0    # Backend-specific override for Metal (0 = inherit GPU default)
# merkle_min_leaves_cuda = 0     # Backend-specific override for CUDA (0 = inherit GPU default)
# prefer_cpu_sha2_max_leaves_aarch64 = 0  # Prefer CPU SHA2 for trees up to this many leaves on AArch64 (0 = default)
# prefer_cpu_sha2_max_leaves_x86 = 0      # Prefer CPU SHA2 for trees up to this many leaves on x86/x86_64 (0 = default)

إعداد ملفات التكوين

يحتوي ملفات التكوين TOML على حقل إضافي extends ، يشير إلى ملفات أخرى TOML. يمكن أن تكون مسارًا واحدًا أو العديد من المسارات:

Single

extends = "single-path.toml"

Multiple

extends = ["file1.toml", "file2.toml"]

Iroha سوف تقرأ بشكل متكرر جميع الملفات المحددة في extends وتقوم بتجميعها إلى طبقات، حيث تقوم هذه الأخيرة بإعادة كتابة الملفات السابقة على مستوى المعايير. على سبيل المثال، إذا كانت القراءة في config.toml:

config.toml

extends = ["a.toml", "b.toml"]

[torii]
address = "0.0.0.0:8080"

a.toml

chain = "whatever"

b.toml

[torii]
address = "localhost:4000"
max_content_len = 2048

التكوين الناتج سيكون chain من a.toml, max_content_len من b.toml, و torii.address من config.toml (تم إعادة الكتابة) b.toml).

حل المشاكل

مرر --trace-config CLI العلامة لرؤية آثار كيفية قراءة التكوين وتحليل.